CONTACT US

               KEITEQ COMPANY LIMITED
Address:   888/213 MOO. 19,

               SOI YINGCHAROEN,BANGPLEE DUMRU RD.,

               BANGPLEEYAI, BANGPLEE, SAMUTPRAKAN 10540,

               THAILAND
Phone:     +66 (0) 2-174-7021

FAX:        +66 (0) 2-174-7022

GET UPDATED

© 2018 by Keiteq Co., Ltd.

zwfxtdbd
Mar 24, 2018

Tool path going outside my 3d model

0 comments

Edited: Mar 26, 2018

Hello,

 

I am attempting to machine a two part mold. Basically it will be similar to a mold used for plastic injection molding. My issue now is that the tool path is going outside my .stl file in the x axis. One of the pictures attached has a red circle highlighting my issues. I need my tool path to stop at the vertical wall.What do the fine folks here recommend

 

Please help.

 

I didn't find the right solution from the Internet.

 

References:-

http://forum.vectric.com/viewtopic.php?f=2&t=28289

B2B Marketing Campaign

 

Thanks

 

New Posts
  • xunyu27664
    Dec 25, 2018

    Mold heat treatment is an important process to ensure the performance of the mold, and has a direct impact on the manufacturing precision of the mold, the strength of the plastic mold, the working life of the mold, and the manufacturing cost of the mold. Mold heat treatment is to play the potential of mold materials and improve the performance of the mold. The performance of the mold must meet: high strength, including high temperature strength, injection mold ,resistance to thermal fatigue, high hardness (wear resistance) and high toughness, and also requires good machinability, including good polishability. weldability and corrosion resistance, etc. The deformation of the plastic mold after heat treatment is generally considered to be caused by cooling, which is not true. Molds, especially complex molds, have a great influence on the deformation of the molds. The comparison of some mold heating processes shows that the heating speed is faster and tends to produce larger deformation.